| Feed in size |
0-350 MM |
| Capacity |
45 – 1200 TPH |
| Application |
Widely used in metallurgy, construction road, railway and commercial concrete industry sand and gravel aggregates. |
Scope of Application
|
It can crush a variety of ores and rocks medium and above medium hardness, such as granite, diabase, basalt, pebble, limestone, dolomite, metallic ores and non-metallic ores, etc. |
| Machine Introduction |
Based on some design principles of traditional multi-cylinder hydraulic cone crushers like fixed main shaft, eccentric sleeve rotating around main shaft and lamination crushing, HPT Multi-cylinder Hydraulic Cone Crusher makes a breakthrough on its structure. After optimization, the structure improves the performance and crushing capability a lot. Meanwhile, the hydraulic lubrication system of HPT Cone Crusher not only ensures the stable operation but also makes the system control more intelligent.
Product Features: Higher crushing ratio, bigger processing capacity, better granularity and shape of finished products. |
| Working Principle |
When a HPT Multi-cylinder Hydraulic Cone Crusher works, driven by the motor, the transmission shaft rotates under the action of belt pulley and triangular belt. Next, the transmission shaft drives the eccentric sleeve to make it rotate around the axis. Meanwhile, the eccentric sleeve forces the movable cone to do pendular movement. This movement makes the movable cone and fixed cone sometimes close to, sometimes far away from the rolling wall. Materials are continuously shocked, squeezed and crushed in the crushing cavity between the crushing wall and the rolling wall. Finally, materials are discharged out of the machine when their fineness reaches the discharging standard.
|
Working Principle
Performance
High Production Efficiency, Strong Holding Capacity
HST Single-cylinder Hydraulic Cone Crusher achieves higher production efficiency and better product quality by matching suitable crushing cavity, eccentric distance and movement parameters. Combined with optimized strength and high-quality components, HST Hydraulic Cone Crusher has bigger holding capacity and crushing ratio as well as stronger throughput capability.
Fully Automatic Control Covering Whole Production Process
The fully automatic control system equipped on the HST Cone Crusher can provide manual control, constant discharge opening control, constant power control and many other operation modes for users to select. It can continuously monitor the internal actual load of the crusher to optimize the use ratio of the crusher and allow it to play its best performance at all times.
Easier for Maintenance, More Effective for Cost Savings
HST Hydraulic Cone Crusher has a simple structure. Almost all checks and maintenances can be done by only taking down the upper rack. The structure can not only make maintenances and checks get easier, but also save maintenance costs a lot. Besides, HST Single-cylinder Hydraulic Cone Crusher is compact on its structure, occupying small floor area, which further cuts expenditures on the foundation building.
Multiple Cavity Types Meet Various Production Needs
HST Hydraulic Cone Crusher has several kinds of standard crushing cavities which can fully meet the secondary, tertiary and even quaternary crushing needs after primary coarse crushing.
Technical Parameters
| Model |
Cavity |
Max. Feed in size MM |
Min. Output size MM |
| HPT100 |
C1（Extra Coarse） |
140 |
19 |
| C2（Coarse） |
100 |
13 |
| M（Medium ） |
70 |
9 |
| F1 （Fine） |
50 |
9 |
| F2（Extra Fine） |
20 |
6 |
| HPT200 |
C2（Coarse） |
185 |
19 |
| M（Medium ） |
125 |
16 |
| F1 （Fine） |
95 |
13 |
| F2（Extra Fine） |
75 |
10 |
| HPT300 |
C1（Extra Coarse） |
230 |
25 |
| C2（Coarse） |
210 |
19 |
| M（Medium ） |
150 |
16 |
| F1 （Fine） |
105 |
13 |
| F2（Extra Fine） |
80 |
10 |
| HPT400 |
C1（Extra Coarse） |
295 |
30 |
| C2（Coarse） |
251 |
25 |
| M（Medium ） |
196 |
20 |
| F1 （Fine） |
110 |
13 |
| F2（Extra Fine） |
90 |
10 |
| HPT500 |
C1（Extra Coarse） |
330 |
38 |
| C2（Coarse） |
290 |
30 |
| M（Medium ） |
210 |
22 |
| F1 （Fine） |
135 |
16 |
| F2（Extra Fine） |
95 |
13 |
| HPT800 |
C1（Extra Coarse） |
350 |
38 |
| C2（Coarse） |
299 |
32 |
| M（Medium ） |
265 |
25 |
| F1 （Fine） |
220 |
16 |
| F2（Extra Fine） |
150 |
13 |
| Model |
Cavity |
Capacity TPH |
Motor power KW |
| HPT100 |
C1（Extra Coarse） |
75-140 |
90 |
| C2（Coarse） |
60-110 |
| M（Medium ） |
52-100 |
| F1 （Fine） |
50-95 |
| F2（Extra Fine） |
45-90 |
| HPT200 |
C2（Coarse） |
145-250 |
160 |
| M（Medium ） |
135-235 |
| F1 （Fine） |
115-220 |
| F2（Extra Fine） |
90-190 |
| HPT300 |
C1（Extra Coarse） |
220-440 |
250 |
| C2（Coarse） |
190-380 |
| M（Medium ） |
175-320 |
| F1 （Fine） |
145-280 |
| F2（Extra Fine） |
110-240 |
| HPT400 |
C1（Extra Coarse） |
300-630 |
315 |
| C2（Coarse） |
285-560 |
| M（Medium ） |
250-490 |
| F1 （Fine） |
180-345 |
| F2（Extra Fine） |
135-320 |
| HPT500 |
C1（Extra Coarse） |
425-790 |
400 |
| C2（Coarse） |
370-700 |
| M（Medium ） |
330-605 |
| F1 （Fine） |
270-535 |
| F2（Extra Fine） |
220-430 |
| HPT800 |
C1（Extra Coarse） |
570-1200 |
630 |
| C2（Coarse） |
520-1050 |
| M（Medium ） |
475-950 |
| F1 （Fine） |
370-800 |
| F2（Extra Fine） |
310-600 |
