Feed in size	125-1020 MM
Capacity	45 – 1000 TPH
Application	Widely used in metallurgy, construction road, railway and commercial concrete industry sand and gravel aggregates.
Scope of Application	It is suitable for crushing soft and medium hard ores for primary or fine crushing operations, such as granite, diabase, basalt, pebble, limestone, dolomite, metallic ores and non-metallic ores, etc.
Machine Introduction	Jaw crusher, also known as pendulum jaw crusher, its another name is stone crusher. It has the characteristics of large processing capacity, simple operation, convenient maintenance and long service life. It is widely used in mining, construction etc other departments.
Working Principle	The jaw crusher motor drives the belt and pulley, through the eccentric shaft to make the moving jaw move up and down. When the moving jaw rises, the angle between the elbow plate and the moving jaw becomes larger, so as to push the moving jaw plate close to the fixed jaw plate. At the same time the material is crushed or split to achieve the purpose of crushing. When the moving jaw descends, the angle between the elbow plate and the moving jaw becomes smaller, and the moving jaw plate leaves the fixed jaw plate under the action of the tie rod and spring, and the broken material is discharged from the lower mouth of the crushing cavity. With the continuous rotation of the motor, the crushing motor jaw crushes and excretes materials in periodic motion to achieve mass production.

 
 
Performance   
 
Stable Structure, Reliable Performance
YAN YAN MACHINERY uses high-quality steel castings for core load bearing parts of jaw crusher, i.e. moving jaw and bearing block. This technology not only guarantees the perfect fitting and seamless connection of crusher rack, but also enhances the radial strengths of the parts, thus realizing more reliable performance and higher durability of the jaw crusher.

Digitalized Processing, Higher Precision
There are tens of lines of numerical controlling machine tools. Operations such as steel plates' cutting, bending, planing, milling and paint spraying are all controlled numerically. The machining precision is high, especially for the core parts.
 
High production and reduction
A larger feed opening increases material intake and ensures that the rocks enter the jaw crusher’s cavity without restrictions. A steeper nip angle decreases operating costs by reducing wear on jaw dies and speeds up material flow down in the cavity. The stroke is amplified from top to bottom, leading it being longest in the bottom of the cavity. This increases the capacity as well as the reduction ratio, resulting in high production in all kinds of operations.
 
Easy to install, operate and maintain
Based on long experience and comprehensive testing at customer sites, the critical areas of jaw crushers are protected against wear. The components and parts that require renewal from time to time are engineered to be easily accessible and replaceable when needed.
 
 
Technical Parameters

Model	Mouth size MM	Max. Feed in size MM	Output size MM
PE-150*250	150*250	≤ 125	10-40
PE-250*400	250*400	≤ 210	20-80
PE-400*600	400*600	≤ 340	40-100
PE-500*750	500*750	≤ 425	50-100
PE-600*900	600*900	≤ 500	65-160
PE-750*1060	750*1060	≤ 630	80-140
PE-800*1060	800*1060	≤ 650	100-200
PE-900*1200	900*1200	≤ 750	95-165
PE-1000*1200	1000*1200	≤ 850	195-265
PE-1200*1500	1200*1500	≤ 1020	150-300
PE-1500*1800	1500*1800	≤ 1200	220-350
PEX-250*1000	250*1000	≤ 210	25-60
PEX-250*1200	250*1200	≤ 210	25-60
PEX-300*1300	300*1300	≤ 260	30-90

 

Model	Capacity TPH	Power KW	Overall size L*W*H MM
PE-150*250	1-5	5.5	758*758*794
PE-250*400	5-20	15	1500*1400*900
PE-400*600	16-65	30	1700*1800*1600
PE-500*750	50-100	55	1890*1940*1870
PE-600*900	90-180	75	2395*1840*2230
PE-750*1060	130-260	110	2275*2425*2840
PE-800*1060	150-300	110	2500*2470*2840
PE-900*1200	200-380	132	3335*3180*3430
PE-1000*1200	230-400	132	3435*3180*3430
PE-1200*1500	400-800	22	4200*3730*4620
PE-1500*1800	450-1000	355	5100*4700*4300
PEX-250*1000	16-52	30	1600*2000*1500
PEX-250*1200	20-60	37	1900*2200*1500
PEX-300*1300	30-70	55	1800*2300*1700